Sheet Bae - Female Ghost Cosplay Figure

Update: I named her Sheet Bae

Check out Easter version of Sheet Bae: https://makerworld.com/en/models/2504367

Bring the trendy Halloween costume to your table top with this  figure. No AMS required.

Please read before you print.

Update:

There are two print profiles available fro X1, P1 series and A1:

• Print with Support Enable Profile: Use this profile if you think it requires support. A piece of mind for you to print and sleep nicely throughout the night. 😌

• Print with No Support Profile: Update: Only print this on bed slinging 3D printer like A1 or A1 mini because it has no z axis movement that will cause the sheet to wobble and leads to fail print. 

  ONLY if you have a well calibrated and maintained 3D printer on a sturdy surface and dried filament, or you want to accept this challenge. And yes, doing time-lapse with this profile is AMAZING! Some people found this challenging and have multiple failures. I designed it this way because I just simply hate wasting material on support and it takes time to remove.

  To reduce chance of failure using no support profile:

  • You may increase the wall thickness and infill, but please do not modify the infill setting lower than what this profile has 
  • You can also reduce the print speed, and it will take longer time to print.
  • In theory, if you encounter many fail attempts, you might want to check if your printer is fine tuned.