N/HO Scale Town Building/Shop

!!!PLEASE READ AND UNDERSTAND ENTIRE MODEL DESCRIPTION BEFORE PRINTING!!!

Hey everyone! This is my N/HO Scale Town Shop Building for your model railroad, or other miniature setup. I took lots of time on the immaculate detail on the bricks, and roof accessories, so I hope you enjoy it!

*Please use my uploaded .3mf files for best print quality*

• I recommend using tree supports for the overhangs over the windows and door, and use a somewhat small layer height for best detail.
• Please clean your build plate before printing, to ensure best adhesion.
• Read the assembly guide fully before printing.
• Print objects separately for optimized color options, or print all the same color and paint it yourself.

ASSEMBLY GUIDE:

Step 1: Print out all parts and use appropriate supports where needed. Glue will be needed for the roof and door, windows may need glue depending on your printer's tolerances.

Step 2: Take the two black pieces, labeled “Roof Pieces” and correctly install them on the notches of the roof, as shown in the model photos above.

Step 3: Glue the roof onto the main base, ensuring it is centered, for a more polished appearance.

Step 4: Snap the windows in place, using the model photos above as a reference if needed. You may need glue depending on your printer's tolerances.

Step 5: Place a dot of glue on the back of the door piece (the side without the door handle) and place in door space as shown in photos above.

Step 6: Allow glue to dry as long as necessary, and enjoy! I recommend using similar colors to the ones I used for best visual appeal.

Thanks for reading this description before printing! Hope you enjoy the model and make sure to provide a photo of it in your layout in the comment section and leave feedback to help me improve! :)