Silverstone Circuit Formula 1 Trophy Stand

A 3D-printed model of the Silverstone Formula 1 Circuit Trophy, designed as a multi-part print

Boost MeHelp Me Design & Post More F1 Tracks!

The model is sized to fit the Bambu Lab P1S build plate (256 × 256 × 256 mm). If you are using a printer with a smaller bed size, you will need to scale the model down proportionally.

Recommended Support Settings (based on my successful test prints on the P1S):

• Support type: Tree supports
• Support pattern: Hybrid
• Overhang angle threshold: 30°
• Top interface spacing: 0.5
• Interface layers: 2
• Top Z distance: 0.2 mm

This setup gave me clean results for the base while minimizing material use and cleanup.

Print, assemble the parts, and enjoy a display piece that showcases one of Formula 1’s most iconic tracks!