A simple fidget that only requires standard Bambu Lab lubricant grease. It works like a miniature joystick, and with a drop of grease applied, it moves exceptionally smoothly.
👉 Printing:
For the best results and smoothest feel, print on a smooth plate.
Printing on a textured plate is possible, but you will notice friction between the parts.
Always clean the smooth plate thoroughly to ensure proper filament adhesion during printing.
👉 Assembly instructions:
Apply a drop of lubricant grease as shown in the attached GIF. (Keep the surface clean after printing—any dirt inside will negatively affect the performance and overall feel.)
Press the parts together for a proper fit.
✅ Tested with PLA and PLA Silk.
Boost MeBoost me if you like the project :) Thanks!
AJM
