Milwaukee PACKOUT 360° 輔助輪升級套件
Milwaukee PACKOUT 360° Auxiliary Wheel Upgrade Kit
Milwaukee PACKOUT 滾輪工具箱本身已經非常實用，但有時候在移動時，還是需要傾斜箱體才能推動。特別是在狹窄空間或需要精準移動時，如果能更輕鬆推動就更好了。
這個 3D 列印的輔助輪支架，就是為了解決這個小痛點而設計的。它為你的工具箱增加了一個第三個萬向輔助輪，讓你不需要再將箱體傾斜，就能像推行李箱一樣輕鬆平推工具箱，大幅提升使用上的便利性與效率。
The Milwaukee PACKOUT rolling toolbox is already incredibly practical, but sometimes you still have to tilt the box to move it. In tight spaces or when you need precise movement, it just feels like it could be easier.
This 3D-printed auxiliary wheel bracket was designed to solve that minor inconvenience. It adds a third swivel caster to your toolbox, allowing you to push it flat on the ground like a suitcase. This significantly boosts its mobility and convenience.
設計特色
- 輕鬆平推：加裝一個 360° 萬向輪，讓工具箱可以輕鬆地在平面上移動和轉彎，不再需要辛苦地翹起箱體。
- 提升便利性：尤其在搬運較重的物品時，能有效減少手腕與手臂的負擔，讓移動過程更順暢。
- 非破壞性安裝：支架設計完全貼合工具箱結構，無需鑽孔或對工具箱進行任何永久性修改。
Key Features
- Easy Flat Pushing: Adding a 360° swivel caster allows the toolbox to move and turn effortlessly on flat surfaces, eliminating the need to tilt the entire case.
- Enhanced Convenience: This modification reduces strain on your wrists and arms, especially when moving heavy loads, making the process much smoother.
- Non-Destructive Installation: The bracket is designed to fit the toolbox perfectly without requiring any drilling or permanent modifications.
列印前的重要提醒
由於市售萬向輪的廠牌和規格眾多，其安裝板尺寸與螺絲孔位可能不盡相同。為了確保列印出的支架能完美符合你所購買的輪子，強烈建議在列印前，先仔細測量你要使用的輪子的安裝板大小及孔位。
Important Reminder Before Printing
Since there are many brands and specifications of casters on the market, their mounting plate sizes and screw hole positions may vary. To ensure your printed bracket perfectly fits the wheel you purchase, we strongly recommend that you carefully measure the mounting plate and hole positions of your caster before you start printing.
所需材料清單
除了列印出的 3D 模型，你還需要額外準備以下材料：
- 萬向輪一個 (作者實測 2 吋輪略卡，建議可選擇 1.5 吋或更小的尺寸，並選擇帶有煞車功能的款式，使用時更穩固)
- 內六角螺絲 M6 四顆
- 四組方形 M6 螺帽
Required Parts List
In addition to the 3D-printed part, you will need the following materials:
- One swivel caster (The designer found that a 2-inch wheel was a bit tight, so a 1.5-inch or smaller size is recommended. A model with a brake function is also a great choice for added stability.)
- Four M6 hex screws
- Four M6 square nuts
列印與安裝建議
列印參數
- 列印材料：建議使用 PETG 或 ABS 或ASA，這些材料具有優異的強度與耐用性，才能應對工具箱的承重需求。
- 填充密度：為確保結構強度，建議提高填充密度。
安裝步驟
- 安裝下部件：將下部件沿著 Milwaukee PACKOUT 工具箱的下方滑入，直到與金屬把手定位。
- 準備上部件：將四個方形 M6 螺帽放入上部件的孔位中。
- 組裝上下部件：將上部件從上方卡入，使金屬把手穩固地夾在上下兩個部件之間。
- 鎖緊螺絲：使用四顆 M6 內六角螺絲將上下部件與輪子鎖緊。
- 插入插銷：最後，將兩個插銷插入兩側的插槽中，完成整個組裝。
Printing & Installation Guide
Printing Parameters
- Material: PETG or ABS or ASA is highly recommended. These materials offer superior strength and durability to handle the load.
- Infill: To ensure structural integrity, you should use a high infill density.
Installation Steps
- Install the Lower Part: Slide the lower part of the bracket along the bottom of the Milwaukee PACKOUT toolbox's metal handle until it's in position.
- Prepare the Upper Part: Insert the four M6 square nuts into the designated slots on the upper part.
- Assemble the Bracket: Snap the upper part into place from above, so the metal handle is securely clamped between the two components.
- Tighten the Screws: Use the four M6 hex screws to securely fasten the upper and lower parts to the wheel.
- Insert the Pins: Finally, insert the two pins into the slots on both sides to complete the assembly.
希望這個設計能為你的工作帶來更多便利！如果你也嘗試了這個改裝，歡迎回來分享你的使用心得和照片！
We hope this design makes your work a little easier! If you print and install one, we'd love to see your results and hear about your experience.
jielin
