Git Gud, a Silksong Inspired Hueforge

Inspired by the Hollow Knight: Silksong video game and all the memes around it, this is what I spent my time on between rage quits contemplating how I need to "Git Gud"

I am still very new to Hueforge, so please provide feedback so I can improve my work.

As always with Hueforge. Do not change the Z value when scaling.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.24mm

Filaments Used:
PLA BambuLab Black  Transmission Distance: 0.3
PLA BambuLab Basic Cyan  Transmission Distance: 3.5
PLA BambuLab Basic Red  Transmission Distance: 4
PLA BambuLab Basic Jade White  Transmission Distance: 5
 

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Cyan

At layer #14 (1.2mm) swap to Red
At layer #19 (1.6mm) swap to Jade White for the rest.