Charlie Kirk Memorial Coin HueForge

Boost MeIf you find value in this print, please consider Boosting. Thank you!

Project: CK 1 Coin HueForge.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #005ba9 PLA+ IIID Max Blue  Transmission Distance: 2.8
    #002043 PLA+ IIID Max Navy Blue  Transmission Distance: 3.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #751825 PLA Protopasta Blood of My Enemies  Transmission Distance: 11
    #906c3f PLA+ IIID Max Coyote Brown  Transmission Distance: 3.6
    #a08c59 PLA+ IIID Max Gold  Transmission Distance: 8
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 8 unique filaments

Swap Instructions:
    Start with Black
    At layer #4 (0.4mm) swap to Blue
    At layer #5 (0.48mm) swap to Navy Blue
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #10 (0.88mm) swap to Blood of My Enemies
    At layer #11 (0.96mm) swap to Coyote Brown
    At layer #14 (1.2mm) swap to Gold
    At layer #16 (1.36mm) swap to White for the rest.