The Legend of Zelda - Link

This is a striking Hueforge print of Link from the Legend of Zelda series. The design captures his intense gaze and classic look, with a splash of vibrant green to highlight the background and his tunic. It's a must-have for any fan!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.24mm

Filaments Used:
    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #ffffff PLA+ Sunlu White  Transmission Distance: 8.5
    #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #16 (1.36mm) swap to White
    At layer #24 (2mm) swap to BambuLab Green for the rest.

Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays the same as changing this will affect how the print turns out)