Sephiroth - Final Fantasy Hueforge

Unleash the one-winged angel with this striking Hueforge print of Sephiroth from Final Fantasy VII. His iconic silver hair and piercing blue eyes are captured perfectly, with cool aqua accents giving the piece a dynamic edge. A must-have for any fan!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm

Filaments Used:
    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #ffffff PLA+ Sunlu White  Transmission Distance: 8.5
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to White
    At layer #22 (1.84mm) swap to Turquoise for the rest.
 

Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays the same as changing this will affect how the print turns out)