P1/X1 Exhaust Fan Adaptor 100 mm hose 45° angled

This is my take on an exhaust fan hose adaptor. I wanted something sleek looking that can be detached. The adaptor fits a 100 mm hose.

The model consists of two parts. The mounting plate needs to be screwed onto the back plate of the printer onto the exhaust fan outlet. You need to replace one of the existing screws to mount it. You need a total of four M3 screws.

To connect the hose adaptor to the mounting plate you need a total of fifteen 10x2 mm round magnets. These need to be glued into the holes on the two pieces. Make sure to use the same orientation of the magnets for all positions on the mounting plate and the opposite orientation on the hose adaptor.