Flat angled EU plug (Denmark)

An angled EU plug for use in flat power socket outlet, where it will protrude less than 15mm from the socket surface. As shown in the pictures, you need to take the pins from an existing plug for use in the flat plug. I also reused the screw and nut from the original plug.

You need to print on of each part, screw the stripped wire into the pins, route the isolated wire through the cut-outs and assemble the two parts into a closed plug.

DO NOT MAKE THIS UNLESS YOU ARE COMFORTABLE WITH HIGH VOLTAGE WIRING AND KNOW WHAT YOU ARE DOING.

Here printed on a Bambulab A1 Mini using white CCTREE ST-PLA using default 0.2mm nozzle and settings in Bambu studio with Normal Support on build plate only.