Derpy Tiger KPop Demon Hunters Wall Decor

Derpy and Sussie Line Art

This is a line art model featuring Derpy and Sussie.

• Uses about 55g of filament at the default size.
• Can be scaled down to fit an A1 mini or scaled up for larger printers.
• Make it as thick or thin as you want. I don't recommend going thinner than 3 mm but it can save some filament. Or go thicker if you want it to stand up straight on it's own.
• Important: Wait until the print bed is fully cooled before removing the model to avoid breaking it.

TIPS:

• Wash your build plate with hot water and soap.
• Use Arachne Wall Generator to best preserve quality.
• I have placed 10 brim ears on points with a lot of stress, you can turn them off by going to Other > Brim Type > No-Brim, but they are very easy to remove and help wtih adhesion.
• Bump up your bed plate temperature by 5 degrees.
• Use Avoid Crossing Wall setting at 200-300 mm to have less stringing.
• If your have a P1/X1/H2 series printer, consider turning off Aux Fan, otherwise the part the aux fan is on might warp!

Boost MeConsider giving me a boost so I can make more line arts :) Make sure to leave a comment with a suggestion on what line art I should make next