Woman with horns - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.07998mm

Filaments Used:
    #000000 PLA Alzament Black  Transmission Distance: 0.1
    #455364 PLA Spectrum Basalt Grey  Transmission Distance: 0.6
    #c4c4c4 PLA HIGH SPEED 3DPower Telegrey  Transmission Distance: 3.1
    #ffffff PLA+ HIGH SPEED Jamg He White  Transmission Distance: 6.9
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Basalt Grey
    At layer #12 (1.04mm) swap to Telegrey
    At layer #16 (1.36mm) swap to White for the rest.