Mario Hueforge

Level up your display with this bold Mario Hueforge artwork, designed in a manga-inspired explosion style.

This print shows Mario mid-action, unleashing fiery energy with a powerful punch. The sharp black-and-white comic shading contrasts against the striking orange flame swirls, giving the piece a dynamic “bursting off the page” effect.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm

Filaments Used:
    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #ffffff PLA+ Sunlu White  Transmission Distance: 8.5
    #d22332 PLA+ Sunlu Red  Transmission Distance: 6
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to White
    At layer #21 (1.76mm) swap to Red for the rest.

Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays the same as changing this will affect how the print turns out)