Harbor Freight Storehouse Bin Label

Label for the Harbor Freight Storehouse Bins. This does not require any fasteners, glue or tape, it snaps into place. The labels are 11.5cmx1.8cm (mine were cut on a cricut)

The clips are different for the left and right. The side with the extra “bump” goes on the bottom of the handle when installing.

Version 2---------------------------

I have never had one of the clips crack when installing them on the bin but several commenters have had them crack when installing. I have increased the wall thickness of the clip in a critical area from .4mm to .8mm in the spots in the image below:

This change does not seem to adversly affect the model. I was able to snap them in place just as easily as the originals. Hopefully this will work for the others that were having problems. I also printed some in PETG and it worked just as well as PLA.

Several commenters have said that they used Bambu Studio to add their own text to the part that spans the handle instead of using a paper label as I did originally.  That is a fantastic idea and I have added some plates to the print profile for the paper label and the blank (add your own text) version. Below is a picture of one I made for some spare bolts/parts on my motorcycle.

Thanks for all the feedback and I hope this version is better than the original