Hek lok: A print-in-place belt clip(Tek-lok clone)

This style belt clip is often used for attaching tools, knives, and other accessories to belts of various sizes.

The hek lok requires no hardware to attach to the belt, but can use standard tek-lok hardware or M5 nuts/bolts to attach various items to the clip. 

Print instructions:

PETG is an ideal material for the repeated flex of the clip, though PLA+ also works fine. 

Recommended to use at least 2.4mm of walls (6 perimeters @0.4mm width) so that the clip arms print as continuous lines, though as few as 4 walls may work. 

Paint on supports are required at the two downward facing surfaces of the clip hooks as shown below. Recommended to use smart fill to paint the entire surface. 

Tech lock tec loc teck lok