September 27, 2025
Description
Ever struggled to find the perfect stand for your clock? Maybe the design was right, but the size was just a little off.
"I can't find a stand that fits this clock perfectly..." "The design is nice, but the size is just a little off..."
This isn't just another 3D model. Think of it as a dynamic blueprint that lets you customize every dimension and design detail. You can craft a truly unique stand that fits your clock or any cherished item perfectly, just as if it were custom-made.
Boost MeIf you love the these designs please consider a BOOST 🚀 It helps me keep creating more designs 🙏This stand is built using a "parametric" approach. It's a powerful system that automatically redesigns the entire model based on the values you input.
A Guaranteed Perfect Fit
Simply enter the "diameter" and "thickness" of your item, and the ideal stand is generated instantly. Say goodbye to the frustration of a poor fit.
Design It Your Way
Beyond basic height and depth, you can also fine-tune aesthetic details like the side taper and corner chamfers with simple sliders. Create a piece that you'll love, perfectly matching your room's decor and your personal style.
No 3D Modeling Skills Needed
Forget about learning complex 3D software. Anyone can create a custom model by simply adjusting the provided parameter values. It's that easy.
Built-in Safety Checks
To prevent the model from breaking due to extreme values, a validation system is included to warn you if a setting is invalid. This allows you to experiment and customize with confidence.
While the design has safeguards, please note that using unbalanced parameters can result in an unstable stand that might tip over.
generateClock (Display Clock Model)
Default: true
Values: true (enabled) / false (disabled)
Description: Shows a preview model of the clock to help visualize the fit. This is for balance confirmation and should be disabled for final output.
resolution_level (Resolution)
Default: 2
Range: 0 (Low) to 2 (High)
Description: Controls the smoothness of curves. Higher values look better but may slow down the preview rendering on some computers.
length(Stand Depth)
Default: 150
Range: 50 to 250
Description: The right-to-left length of the stand. A larger value provides more stability.
height (Stand Height)
Default: 70
Range: 50 to 250
Description: The overall height of the stand.
bottom_thickness (Bottom Thickness)
Default: 10
Range: 5 to 20
Description: The thickness of the stand's base, which raises the displayed object off the surface.
taper_ratio (Stand Taper)
Default: 0.85
Range: 0.7 to 1.0
Description: The angle of the side walls. A value of 1.0 makes them vertical, while smaller values create a narrower top.
edge_chamfer (Corner Chamfer)
Default: 5
Range: 0 to 10
Description: The size of the chamfer on the stand's four vertical corners. Set to 0 for sharp 90-degree corners.
cylinder_radius (Clock Diameter)
Default: 247
Range: 10 to 400
Description: Enter the "diameter" of the object you want to display. This determines the size of the cutout.
cylinder_length (Clock Thickness)
Default: 40
Range: 10 to 60
Description: Enter the "thickness" of the object you want to display. This also affects the stand's overall width.
cylinder_length_mergine (Cutout Margin)
Default: 15
Range: 10 to 50
Description: An extra margin to ensure the back wall supporting the clock is thick enough. A larger value increases the stand's strength.
tilt (Tilt Angle)
Default: 3
Range: 0 to 5
Description: The viewing angle of the surface where the object rests. A larger value will make it face more upwards.
License:
Standard Digital File License
conex68000
