February 12, 2024
Description
A wolf print I made on Hueforge using black, white, and gray Sunlu PLA Meta and orange Bambu PLA Basic.
The print instructions are as follows:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA Sunlu Meta Grey Transmission Distance: 3.5
PLA BambuLab Basic Orange Transmission Distance: 5
PLA Sunlu Meta White Transmission Distance: 8
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey
At layer #9 (0.8mm) swap to Orange
At layer #10 (0.88mm) swap to White for the rest.
License:
Standard Digital File License
bhling
