Hex Connect Phone Mount - Bike Handlebar

***DISCLAIMER: I am not responsible for damage caused to your phone if you use this mounting system. Use at your own discretion.***

 

**Update 10/16/2025**

Added less stiff version to make it easier to mount the phone when using stiffer plastics than ABS.

**

 

This is a phone mount for mountain bike handlebars using the Hex Connect mounting system.

 

Included are both standard and XL size Hex Connect mounts.

 

Boost MeHelp me spread this design by boosting me! I would love more people to use and design Hex Connect models!

 

Standard vs XL pros and cons:

Standard:

• Pros
  • Thin enough for proper Magsafe support (2 mm)
  • Slimmer case is more convenient for everyday use
  • Allows use with Magsafe mounts using a case-mounted metal ring
  • Probably stronger than you would expect :)
• Cons
  • Not as strong as XL

XL:

• Pros
  • Strongest connection for high-intensity activities
• Cons
  • Thicker case is less convenient for everyday use

  • Not Magsafe compatible

     

Using Hex Connect:

• To connect: Align the hole in the phone case to the Hex Connector. Make sure the back of the phone is flat to the face of the Hex Connector. Either push the phone straight onto the connector or start a little clockwise and turn the phone counterclockwise as you push for a smoother connection action.
• To disconnect: Pull slightly on the phone, then turn counterclockwise while holding slight pulling pressure on the phone.

 

Tip for Left-Handers: Mirror the connector in the slicer to reverse the rotation direction. The case design is ambidextrous.

 

Glue the connector piece to the clamp using superglue. Then put a piece of filament into the small hole that goes through the clamp and connector where they meet to lock them together.

 

For printing tips, more Hex Connect accessories, and a list of available phone cases, visit: https://makerworld.com/en/models/1834578-hex-connect-base-design-files#profileId-1959313