September 28, 2025
Description
Bring a touch of Halloween magic into your home with The Witch’s Hearth, a glowing cauldron centerpiece that captures the spirit of spooky nights and enchanted brews.
No AMS required for printing. The cauldron fits tea lights with a diameter of up to 40mm and heights between 17-27mm and allows accessing switch and battery / charging port without disassembly. Two electric tea lights are required for this set.
Of course the cauldron can be used alone or with different stands. (Example from the third photo can be found here: https://makerworld.com/en/models/926474 )
Disclaimer: Only electric tea light can be used with this design!
Printing
The cauldron was optimized for printing at 0.16mm layer height. The parts are all self supported, but I added a tree support to the arch to ensure proper bridging. I also added a brim for the cauldron, which you can disable at your own risk.
The shade prints best from Basic PLA. Translucent PLA might be too transparent for a nice effect, while Matte PLA might be too opaque.
Assembly
No additional tools or screws are required for assembly. First use the printed tool to screw the tealight into the cauldron. Now you can use the ring to secure the shade on top. Then you can simply put the handle on by bending it slightly. Now use the hanger to put the cauldron on the arch.
A1 Mini users have to print the arch in two pieces, which you can simply glue together.
If you like this design, check out my Halloween Collection! https://makerworld.com/en/collections/2376084-halloween-decoration
Commercial license available on Patreon and MakerWorld!
License:
Standard Digital File License
Maxx Design
