February 13, 2024
Description
| Important notice: I have restored this page because this design is under a Creative Commons license and deserves to be shared - and attributed properly. However, please understand that I do not regularly check comments or messages on MakerWorld. I encourage you to find me on Printables or visit lucky13toys.com. |
This is my own work, originally uploaded to Printables.
This model was originally designed for the Jointed Figures contest on Printables. This snap-fit model starts as a one-inch cube and flips inside out to reveal a cute, spiderlike robot.
The 3MF file has all the parts laid out in one file, or you can print individual parts as desired. You'll need one cube body, two root joints, and four each of the legs and feet. Parts are designed to print without supports, but a brim can help with adhesion on the small parts.
Recommended print settings
| Material | PETG, ABS, or ASA for best results PLA is okay, but the ball joints will loosen over time. |
| Layer height | 0.15mm (first layer 0.2mm) |
| Infill | 10-20% rectilinear |
| First layer speed | SLOW - 25% of default (at least for small parts) |
| Supports | None |
| Brim | As needed - small parts only A brim may interfere with the print-in-place hinges of the cube body. |
| Additional settings | ✅ Print external perimeters first |
Once the parts are printed, assemble them as shown in the video below. All parts should snap-fit into place, no glue needed. This video also shows how to pack Little Cube Guy into its cube form, then transform it into spider form.
This design is now under a CC BY 4.0 license. This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on your product page:
| Little Cube Guy © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 |
Please help me build my identity as a creator by referring to this design by its original name. Don't pass off my work as your own product.
Want to support future projects with a one-time donation? Make a PayPal donation here!
License:
BY
Lucky 13 Toys
