Rally Chain - Cleveland Indians Chief Wahoo

Show support for you team with this oversized rally / hype chain. The logo itself is printed face down to give an excellent aesthetic look.

This logo is the Chief Wahoo from the Cleveland Indians days.

I used user Billrobland's oversized chain link for the main chain links. I then designed a smaller version of the chain link as well as a peace sign link to connect the logo to the chain.

It is very easy to assemble the chain: Put 2 links together through the chain openings, then spin one link around and attach the next link, repeat until desired length is achieved. Finally attach the chain from each end to the peace link along with the logo / small chain link.

Print Profile:

• Plate1 - Links
  • 15 Oversized Chain Link End
    • Print 2 times or more colors, need about 25 chain links in total
  • 1 Oversized Chain Link End Small
    • Used this to connect the logo to the peace link
  • 1 Oversized Chain Link Peace
• Plate2 - Logo
  • Prints face down with an optimized print color sequence.
  • I do suggest staying close to your printer during the 1st layer color swaps. I usually check during the color purge for any stringing or debris left on the logo. I use a long stem lighter to quickly go over the print and then a toothbrush to help remove any left over debris.

Link to the original post:

• Oversized Chain Links - https://makerworld.com/en/models/25960-chain-links-for-logo-s-with-video#profileId-22348