Milwaukee Packout Mount

This is another mount for Milwaukee's packout series, i have tried others versions of it but found them to frail and lose.

So i just made my own.

I have focused only on the mounts where they hold down the items, and therefore there is nothing connecting the mounts to each other.

My printer P1S was not big enough for my initial version, which is why i dropped the link between the mounts, and made a template, thus saving me a lot of plastic, i have made over 5 complete mounts.

When you open the file in Bambu Studio, you will find 3 versions of the mount, 11, 12 and 13 mm in height, i used the 12 mm.

I made the other ones if somebody finds them to lose or to tight.

In the last picture you can see the spacers, and how they are being used.

There is room to fit the middle mount in the bracket, i just did not see the point in doing so, since there is no real grip on that one.

I also made a template to fit a single line of mounts if you have the small box or something else, but i have not tested it since i do not have one of those. 

The spacer for the small model fits in the middle of the front mount, and should place the lock correctly, in theory.

They should also work vertically, i just have not tried it.

And if you have any need for adjustment or maybe some good ideas, please write to me and i will get right on it.

Happy printing