Cyberpunk / Techwear Basecap

I created a cyberpunk/techwear baseball cap for a cosplay.

 

The design consists of the upper part with the horns and a lower part for the cap's shield.
Both parts are available in an "AMS version" and a “NO AMS version”. The version without AMS has a pause where the filament can be easily switched manually.

 

 

How to assemble:

1. Carefully heat the parts with a hair dryer and bend them into shape of your hat 
2. Use a needle and thread to sew the top part to your hat. The best way to do this is to use the small triangles on the sides. 

3. If you printed the NO AMS version simply glue the screw heads  into the designated holes

4. Then attach strong double-sided tape at the downside of the shield part and put in on your hat

 

 

 

Here is the cap I used for this: https://aliexpress.com/item/1005008487703215.html?spm=a2g0o.order_list.order_list_main.16.513f5c5fRD6PO8&gatewayAdapt=glo2deu

 

 

If you like this model, please rate, share your make, like and boost it 🫶

Boost MeDigital hug button 😁