Hat for A1 - Top Hat

Boost Me🍍If you enjoyed the model, consider a like and a Boost! It's free, and let's me know you want to see more!🍍

HAT FOR A1 - SMALL CROWN
 

This model features both singular and multi-coloured options that can be achieved with or without an AMS.

Sometimes I want my printer to feel sophisticated and dapper, and this is quite the spiffy way to do it! I designed this small accessory to fit on top of my Bambu Labs A1 using my Crossbeam Adapter model. This model was designed to look like a top hat, roughly 54mm in diameter at the base. To install, simply slide the back opening into the matching dovetail on my Crossbeam Adapter model.

⚠️CAUTION⚠️
Before continuing your next print, check for clearance such that the toolhead assembly does not collide with the accessory. Zero your printer position, raise the toolhead to it's highest position, and manually slide the toolhead back and forth horizontally across the gantry to ensure clearance for it and any other add-ons you may have. You don't want to find out the hard way if there is any interference. 

Printed and Tested with Bambu Labs PLA Basic