160*100*80-tissuebox-pattern-logo

这些图案适用于JJJ设计的7环下沉式花式纸巾盒

即使你没有多色系统也可以在切换颜色的相应层中插入暂停进行手动换料来实现多色打印。 

纸巾盒主体下载：

中国站（CN）：

https://makerworld.com.cn/zh/models/1634235-7huan-xia-chen-shi-hua-shi-zhi-jin-he-tissuebox#profileId-1790025

国际站（Global）：

https://makerworld.com/zh/models/1846435-7-ring-descending-decoratable-tissue-box#profileId-1973220

中国站（CN）其它图案：

https://makerworld.com.cn/zh/collections/1414210

国际站（Global）其它图案

https://makerworld.com/collections/15421595

======================================================

These patterns are designed for the 7-Ring Descending Decoratable Tissue Box designed by JJJ.

Even without a multi-color printing system, you can achieve multi-color effects by inserting pauses at corresponding layers for manual filament changes during color transitions.

==========================================

========================================================================================

模型Model:

  商标图案LV01 PATTERN-149X89-LOGO-LV01

  商标图案LV02 PATTERN-89X89-LOGO-LV01

打印填充设置100%，首层0.2mm，填充层高0.2mm

实际的厚度是1.6mm

使用的材料（推荐使用PLA）：

  任何你喜欢的PLA颜色都可以

材料切换说明(Bambu Studio)：

  以一种颜色开始先切片，切片后在预览右侧选择规定层的颜色

  在第5层（1.0mm）切换成一种颜色

  以上设置完成后再次切片，然后打印

(注：忽略切片软件提示的悬空警告)

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm

Actual Thickness is 1.6mm

Filaments Used （PLA is the first choice）: 

  Any PLA color that you want to match

Swap Instructions (Bambu Studio):

  Start with one color and slice first. After slicing, select the specified layer's color on the right side of the preview. 

  At layer #5(1.0mm) swap to a color

  At layer #7(1.4mm) swap to a color for the rest.

After completing the above settings, slice again and then print.

(Note: Ignore overhang warnings from the slicing software.)