1xAA Battery Box with Snap Lid

I designed this box for 2 AA batteries. It can be easily installed in a 60x45mm hole. It can be fixed with glue.

 

Print settings:

• meterial: PETG
• layer height: 0,2
• infill: 25%
• support: yes (Normal), i used PLA as support material
• brim: yes (manual, recommended for the top of the box)

Here is a printing guide for using PETG and PLA for support: https://wiki.bambulab.com/en/filament-acc/filament/h2d-pla-and-petg-mutual-support

 

Similar model: 

• 4xAA Battery Case with Snap Lid: https://makerworld.com/en/models/2551123-4xaa-battery-case-with-snap-lid#profileId-2809634
• 3xAA Battery Box with Snap Lid: https://makerworld.com/en/models/1037791-3xaa-battery-box-with-snap-lid#profileId-1022007
• 2xAA Battery Box with Snap Lid: https://makerworld.com/en/models/1824784-2xaa-battery-box-with-snap-lid#profileId-1948022
• 1x18650 Battery Case with Snap Lid: https://makerworld.com/en/models/1956199-1x18650-battery-case-with-snap-lid#profileId-2102412
• 3x18650 Battery Case with Snap Lid: https://makerworld.com/en/models/2505747-3x18650-battery-case-with-snap-lid#profileId-2754978

Boost MeBOOST ME, IT`S FREE!!!

If you like my uploaded model, please take a look at my other works!