5C Collet Block

Made this 5C collet block to be able to cut 30 degree angles onto round stock. Each facet is numbered 

The print profile is set up to use Bambu ASA currently. 
This isn't intended to be used with heavy machining operations but will handle light duty work. 
A 5C collet nut will be needed to make this work!

https://www.travers.com/product/ttc-cb5-n-collet-fixture-69-001-013?srsltid=AfmBOoo71xmyeZli7cz0nm-dfqqYVjDVmgzMQaHAqS4Mv_OEFhbl6YFjeYE