Mixnmatch Faerie Dragon

This is a MixnMatch Buddy that that you need two files for: you will need to print a body file (keychain hole/without, multicolor/single) and a wing file (AMS multicolor/single). Once everything is printed, just clip the wings in!

Anything designed by me with the MixnMatch label in the title, will all be able to be used interchangeably if it is the correct body part- all wings will work with the wing slots.

That's right-

you want a luna moth body with these dragon wings? Print these wings and that body instead! Prefer the fire moth wings, but the Charizard (inspired) body more? print that body and those wings!

No supports are needed for printing:

Body

2-3 walls

10%gyroid infill

Wings

2-3 walls

15-20% gyroid infill - I recommend a higher infill on these just so that they are a little more sturdy ( they have a thickness around 3.0 -3.6 mm)

There will be other MixnMatch Buddies uploaded…to mix and match!

OG Dragon

Faerie Dragon

Frankie the Charizard dragon

Others completed but needing uploading:

Fire moth

Luna moth

Moonlight moth

This is a Private Use file only. If you would like to sell them, please purchase the commercial license file over at cults HERE.

Notes: The wings should not be constantly switched out - there is a chance for wear on the open wing link with weaker materials like matte. The idea I was going for booth wise was that a child could pick and choose there favorite parts to have their own unique buddy that is unique and special that they “helped” create. If the wings need to be removed, hold the wing as close to the open link as possible and turn the wing so the opening is at the back when you pull.

Happy printing!