Desk lamp

I'd like to present my project for a lamp, created using the Bambu Lab Lamp Kit 001. I received this kit with an order and decided to put it to good use. I needed a lamp to provide better light for my workbench, as the LED strip I had was more for decoration than actual illumination.

This lamp should also work perfectly as a bedside reading light. I got a bit carried away with the design – I was really bothered by the excess cable length, so I designed the model to allow for a more aesthetic way to wrap and shorten the cable around the lamp's arm.

You will need:
 

a) To print:

• 1x Lampshade.stl
• 2-3x Swivel joint.stl
• 1x Knob bolt.stl
• 1x Clamp.stl (choose the size S, M, or L for your table)

b) Other parts:

• 3 or 4 M5x25mm Pan Head Screws with matching nuts
• 2 M3x10mm Screws with washers and nuts
• Bambu Lab Lamp Kit 001

Assembly Instructions:

1. Measure the thickness of your desk or bedside table.
2. Print the model. If you are using the provided 3MF profile instead of the STL files, make sure to leave only the clamp size that fits your table's thickness.
   • Small: 12-20mm
   • Medium: 21-30mm
   • Large: 31-38mm
3. The lampshade can be safely printed with a 0.8mm nozzle. For the rest of the models, use a standard 0.4mm nozzle and a 0.2mm layer height as a minimum.
4. After printing, unscrew the socket's outer cap and press the socket assembly into the lampshade, aligning the holes on the socket with the holes on the shade.
5. Insert the two M3x10mm screws. On the other side, add the washers and tighten the nuts by hand. You don't need any tools for this.
6. Screw the outer cap back onto the socket. If you have trouble gripping it, try using a rubber band or tape for better grip.
7. Screw the 2-3 swivel joints together.
8. Attach the clamp to the last swivel joint.
9. Using the knob bolt, tighten the clamp onto your desk or bedside table.