8"x8" Testing in progress. Only print this if you want to help with the testing and are willing to provide feedback and photos. *Cannot validate that the print will work for every situation at this time.
Procedure:
Print the base on plate #1
Print the pins on plate #2 - ****The print will pause at layer 53. When this happens the base should be dropped over the top of the pins and pushed down until the tops of the pins are above the level of the base***
Press print to resume the print and seal up the pins to capture the base
***Allow plate to cool first*** and carefully remove from the plate and remove the brims from the pins.
meow skulls
