Vampire Cat Door Knocker

Painted 3MF included. Verify your settings, including flush settings. If you have issues with the straw, slow down your acceleration. 

This vampire cat is actually very friendly and brought you a mouse to hang from your door or wall.

Note: This is an older model, but it's still a lot of fun to print. New Halloween models are coming out weekly. 

Some assembly is required.
The small cylinder connects the mouse tail together, if the cylinder is loose, you may want to glue it. It is set to the correct size, but depending on your printer, it could be loose or tight. Connect one side of the cylinder to the mouse tail, and connect the other side through the opening on the cat. There is a keyhole in the back for easy hanging on your door or wall.

Printing recommendations:
.20 layer height
Supports needed - Auto support organic (tree) worked well 
3 walls - 5- 15% infill
Allow the plate to cool before removing the prints.
Reduce acceleration and adjust overhang speeds as needed

This design is available for free for personal use only.  

Check out my membership on Patreon, Thangs, or MyMiniFactory for more designs.

Looking for more designs? 🛍️ Browse the full collection in the Rebel Alicorn MMF Store

⚠️ Important – Please Read: All Rebel Alicorn Designs are protected under Copyright Law.

Your purchase grants you the right to download and print the design for personal use only. You do not have permission to: Resell, Remix, Alter, or Redistribute the digital files in any form

No design modifications are allowed. Except for keyring holes and straw holes, other changes must be approved.

Selling physical prints of any Rebel Alicorn design requires authorization. To become an authorized seller, you must join the “Merchant Tier” on Patreon, Thangs, or MMF.

⚠️ Safety Warning: These designs are not suitable for unsupervised play by children or pets. Broken or rough-played 3D prints may produce sharp edges or small parts that can pose a choking hazard. Not recommended for children under age 5.