This design is available for free for personal use only.
A little celestial magic to light the night!
I used a battery-operated puck light that has a remote that changes colors.
Painted 3MF included. Please double-check that the settings work with your printer before starting. Always begin a new project and verify your flush settings to ensure the best results.
The cylinder in the 3mf for the light space is set to 65mm - Change as needed for your light.
Those using a single color printer, you can pause the print at the layer just after it finishes the outline of the design, which shows layer four in the image that I posted, or you can just print it one color and achieve the look like the image of the white lantern. Painted 3MF and STL included. Please double-check that the settings work with your printer before starting. Always begin a new project and verify your flush settings to ensure the best results.
Printing Recommendations:
- Bridge Direction: 45 degrees - This is to help with the underside of the lantern top.
- Initial layer and initial fill: 25 - 50 mm/s
- Layer Height: 0.16 - 0.20 mm
- Walls: 3
- Infill: 15%
- Supports: This has been printed without supports. You may need support for the stars on the top, depending on your printer.
- Cooling: Let the plate cool completely before removing your print to avoid warping or damage.
- Printer Acceleration: Slow down printer acceleration for smoother results. Printing the outer walls at half speed helps create a nice, clean finish.
Looking for more designs? 🛍️ Browse the full collection in the Rebel Alicorn MMF Store
⚠️ Important – Please Read: All Rebel Alicorn Designs are protected under Copyright Law.
Your purchase grants you the right to download and print the design for personal use only. You do not have permission to: Resell, Remix, Alter, or Redistribute the digital files in any form
No design modifications are allowed. Except for keyring holes and straw holes, other changes must be approved.
Selling physical prints of any Rebel Alicorn design requires authorization. To become an authorized seller, you must join the “Merchant Tier” on Patreon, Thangs, or MMF.
⚠️ Safety Warning: These designs are not suitable for unsupervised play by children or pets. Broken or rough-played 3D prints may produce sharp edges or small parts that can pose a choking hazard. Not recommended for children under age 5.
Rebel Alicorn Designs
