Lucky Cat Fortune Spinner

Finally, an update again! Anyone here missing Mikang(Our cat)? (*╹▽╹*)

This time I made a Lucky Cat Fortune Spinner. Just give it a gentle spin, and it will smoothly turn to bring you good luck!

I made two versions: one is the Good Luck Edition, with only positive words—wherever it lands, that’s the kind of blessing you get.

The other is the Fortune Draw Edition, more like a lottery—you might get lucky or unlucky, so it all depends on your luck!

Here’s how to assemble it:

Recommended Installation Steps (Text Version):

1. Attach the face, collar, and hat parts.
2. Press the base bearing back and forth to loosen it fully (do not disassemble any part of the bearing), then apply a few drops of lubricant or cooking oil.
3. Insert the good-luck tag into the base.
4. After combining the two base parts, press the cat body into place. (If it’s unstable, you can apply a small amount of glue into the groove at the bottom of the cat, but don’t use too much to avoid getting glue into the bearing.)
5. Finished! Please share a photo. (Thanks♪(･ω･)ﾉ)

All printing settings have been tested multiple times. Please do not change them casually if you are unsure!

Additional Installation Detail Reminder:
The coin on the collar has a flattened top to make it easier to attach at the joint.

Mikang wishes you joy and lots of good luck spins! ღ( ´･ᴗ･` )