F-22 Raptor Hueforge

HueForge of an F-22 Raptor. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x150mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm

Filaments Used:
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #84754e PLA BambuLab Basic Bronze  Transmission Distance: 1
    #8e9089 PLA BambuLab Basic Gray  Transmission Distance: 2
    #e7ceb5 PLA BambuLab Basic Beige  Transmission Distance: 8
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 8 unique filaments

Swap Instructions:
    Start with Turquoise
    At layer #4 (0.4mm) swap to Blue
    At layer #12 (1.04mm) swap to Black
    At layer #13 (1.12mm) swap to Blue Gray
    At layer #17 (1.44mm) swap to Bronze
    At layer #19 (1.6mm) swap to Gray
    At layer #21 (1.76mm) swap to Beige
    At layer #26 (2.16mm) swap to Jade White for the rest.