M8 Screws

UPDATE: If you can't find the dimensions you are looking for, visit my profile and look for “M8 Screws v2.0”.

M8 Screws Kit

Contents:

• Screws: 1× M8×20, 1× M8×40, 1× M8×80
• Nut: 1×
• Washers: 2×
• Wing Nut: 1×

For good results, you need a layer height of 0.08mm

Note: These screws are 3D printed. Their mechanical strength is limited and they may not withstand significant loads.

Boost MeIf you enjoyed this design and found it useful, I’d greatly appreciate a Boost!