Pokemon Battle Arena

This "Pokemon: Battle Arena" was designed in mind with the smaller Pokemon 2" action figures. No glue is needed for this model and everything snaps into place. The stadium seating fits nicely against the field border and aren't connected so you can move it around if needed. You can also print two to have seating on both sides. The screen fits right into the top of the stadium

The tolerances are tight for the "field inlay" so make sure you use a solid object to help push it down firmly. The image for the “screen” can be anything you want, you just need to figure out your printers settings to make sure you get the size you want. I found that a 281x187 pixel image size worked great with minimal cutting needed to fit inside the screen. I used a large piece of tape over the picture to give it a glossy look.

I printed it with 10% infill to cut down on time and filament but 15% works nicely. All pieces are better printed at 130% to fit the 2" figures comfortably, but sizes can be whatever your needs are. The kids love it! Enjoy!