Custom Magic: The Gathering 1/1 Saproling Token
Are you getting ready to completely overrun your pod with Slimefoot or the Mycotyrant? Do you want your friends to look at your tokens and say “oh that's so cute, there's no way your Ghave deck is that scary” when it really is? Then you definitely need to print some of these Saproling Tokens!
- Sturdy: All of my tokens are 1.5mm thick, ensuring they last and are harder to lose.
- Standard Size: All of my tokens have the same height and width as a standard Magic: The Gathering Card, so they will fit in your deck boxes.
- Customizable: The image is embedded into the token, so it's easy to change the colors on each segment of the print.
Boost MeLike my designs? Consider sending me a boost. They keep me inspired to make more Magic: The Gathering accessories.
Want to sell physical copies of my prints? Subscribe to my Patreon for a commercial license!
This was printed with the 0.2mm nozzle to capture the finer details. You can print this with the 0.4mm nozzle, but you'll need to take some extra steps to get there.
- Make sure your plate is very clean.
- Set the initial layer width to .21mm.
- Reduce initial layer speed to 20mm/s and initial layer infil speed to 50mm/s
- Make sure the print bed is 65C. The default temperature won't work. Equally important that you let the build plate cool completely before removing, the increased bed temp means that if you try to pull it before it's cool, the print will bend and warp.
Regardless of what nozzle you use, make sure the slice gap closing radius is set to .001.
Magic and Magic Accessories
