Oogie Boogie Bogg Bag Charm
Minimalist screw-on backing. Zero wobble. Maximum mischief.
Roll the dice, maker—this little sack of bugs is ready to haunt your Bogg bag in the best possible way. Print it, screw it on, and enjoy that delicious “who let Halloween Town into the grocery aisle?” energy every time you grab your bag.
What makes this fun
- Chaotic-cute: Instantly upgrades your Bogg bag from “wholesome errand” to “spooky side quest.”
- Minimalist screw-on backing: Low-profile, comfy against the bag, and won’t spin or wander off to gamble with skeletons.
Suggested print recipe (tune to taste)
- Nozzle: 0.4 mm (0.2 mm for slower, crispier vibes)
- Layer height: 0.12 mm
- Walls: 2
- Infill: 15% Gyroid
- Supports: Not needed
- Bed adhesion: PEI Plate set to 62C
- Orientation: Face down for clean finish
Filament tips
- PLA Basic Black and Bambu Glow-in-the-dark green absolutely slaps on this model.
Install (15 seconds, plus evil laugh)
- Pop the post through a Bogg hole from the front.
- Thread the minimalist screw-back from inside the bag until snug.
- Give your best villain chuckle for five seconds. Optional (but recommended).
License & credits
- Uploaded for free personal use on MakerWorld. Please check the MakerWorld license on the model page; redistribution of files/prints is typically restricted under the Standard Digital File License. (Bambu Lab Community Forum)
- Fan-made, Disney-inspired homage—not affiliated with Disney or Tim Burton.
Jeffylou87
