October 6, 2025
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 117.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 1
#003b3b PLA BambuLab Basic Green Transmission Distance: 2.4
#ff6a13 PLA BambuLab Basic Orange Transmission Distance: 5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #13 (0.64mm) swap to Green
At layer #22 (1mm) swap to Orange
At layer #34 (1.48mm) swap to Jade White for the rest.
License:
Standard Digital File License
ENO3D
