PCIe bracket for 92mm FAN

This very unique PCIe bracket can utilise 5 pci-e unused slots to accommodate standard 92mm PC fan. Usually requires full ATX PC case to fit in, with 2 slots still free for dual slot GPU.

I have vertically mounted GPU and use this bracket for better exhaust airflow around bottom part of motherboard and back side of the gpu.

I highly recommend using at least PETG (or better) for durability and heat resistance. The bottom pci-e notches are a bit tricky to print so they use flat supports. The easiest way to remove these supports is to use bambu scraper and simply slide it and slice the support away.

The bracket contains no fan mesh for best airflow possible. In case you need mesh protection, use thin steel one attached along fan screws, it has the best airflow and still offers good protection.

DISCLAIMER: various PC cases have different space width (thickness) for PCIe bracket teeth. My model uses standard 1,2mm but it can happen it will be too thick for your case. If that happens you can try to heat the teeth part with airdryer and flatten it even more with a flat steel object such as knife to adjust thickness.