Rikku - Final Fantasy Hueforge

Bring a touch of Spira to your space with this 150mm x 150mm Hueforge of Rikku from Final Fantasy X! This design captures Rikku’s energetic and playful personality in crisp grayscale tones, with subtle touches of colour to highlight her iconic headband and accessories. The layered shadows and textured depth make her really stand out.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 3.2mm

#000000 PLA+ Sunlu Black  Transmission Distance: 0.6

#ffffff PLA+ Sunlu White  Transmission Distance: 8.5
#01b3ff PLA+ Sunlu Sky Blue  Transmission Distance: 4
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #17 (1.44mm) swap to White
    At layer #26 (2.16mm) swap to Black
    At layer #34 (2.8mm) swap to Sky Blue for the rest.

Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays at 3.2mm as changing this will affect how the print turns out)