Philips Hue Dimmer Switch Mount for Light Switch

⚠️ Disclaimer:
A small metal plate needs to be glued in the back so the dimmer v2 holds inside the recess with its magnet.


📐 Design & Fit

• Precisely tailored for the Philips Hue Dimmer V2 — it fits snugly without gaps
• Compatible only with 80 × 80 mm wall switches, up to 14.5 mm depth
• Designed to be printed flat with the dimmer switch recess facing up for best fit
• No mechanical parts — just a simple clamp-on mount

🖨️ Print Settings & Notes

• Print orientation: flat, with dimmer recess facing upward
• Materials: e.g., PLA
• Settings: 0.4 mm nozzle, 0.2 mm layer height, 15% infill
• Supports are needed for this print ⚠️

🧩 Assembly & Add-ons

Glue a thin metal plate inside the rear recess (the one against the wall switch cavity) — it adds friction and ensures the dimmer holds firmly

Just press the mount over your existing wall switch — done

ℹ️ Purpose & Note

This mounting plate stops users from cutting power to your hue lights with the standard wall switch. Your Hue Dimmer stays fixed, functional, and always ready 💡