Case plus for DJI neo

If you are lookong for a case for your Neo 2, please take a look at this one: https://makerworld.com/models/2080112-dji-neo-2-case-plus

Is it an exaggeration to say that this is the best case for the DJI neo?

It's the  further development of my popular DJI neo case (over 2.2k downloads and over 1.5k direct prints - stand 08.10.2025).
It is the best-fitting, most compact, and most visually appealing case that you can find.

• included eyelets for a strap that fit discreetly and do not require any additional space
• an included durable screw carabiner
• 2 TPU flaps to access the USB-C port and power button while the box is closed.

Print the case and the carabiner in PLA, PETG, ASA, ABS or every other filament you like.

Print the 2 flaps in TPU. Place the flaps 90° of the final position in the fixing holes, push them in and rotate them down. So they hold well on the case well also when they are opened.

!!!
If you don't need the access to the USB-C port and power button or your TPU has run out you can print the printprofile “Caps instead of TPU closures” instead of the TPU plate in a stiff material and clip them in (only once, they will be damaged when removed). 
This way your neo is protected and you can reprint the TPU closures when the new delivery arrives.

If you need a full protection also while flying then take a look at DJI neo Safety Plus (Case & Bumper includet!)