USS Perry-class Guided Missile Frigate 1/350 Scale

Here are a few important notes:  

1. This model doesn’t require AMS. I’ve arranged the parts by color on separate plates — you’ll need four filament colors in total: grey, red, black, and gold. 
2. You’ll need glue to assemble most of the parts. 
3. The missile launchers, main gun, and CIWS are movable — do not glue their connecting joints. 
4. This model contains many small and delicate structures with complex supports, so please be very careful when removing the supports. 
5. I added a pause at the text area on the stand so you can switch to a different color for the lettering.

================================

📋 Recommended Print Settings (For Best Results) 

• Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly. 
• Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model. 
• Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping. 
• Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion. 

🔧 Assembly Diagram Notes 

• You’ll need super glue to attach all the components together.