Yuna – Final Fantasy X Hueforge

Completing the perfect Final Fantasy X Women — here’s Yuna

This piece highlights Yuna’s calm strength and gentle spirit, with layered grayscale tones and delicate colour accents on her staff and hair beads. The subtle depth and lighting bring out the emotion in her expression beautifully — a perfect companion to the Rikku and LuLu Hueforge.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 3.2mm

#000000 PLA+ Sunlu Black  Transmission Distance: 0.6
#ffffff PLA+ Sunlu White  Transmission Distance: 8.5
#01b3ff PLA+ Sunlu Sky Blue  Transmission Distance: 4
#f0be02 PLA PolyTerra Savannah Yellow  Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #15 (1.28mm) swap to White
    At layer #26 (2.16mm) swap to Sky Blue
    At layer #32 (2.64mm) swap to Savannah Yellow for the rest.

Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays at 3.2mm as changing this will affect how the print turns out)