Bowser – The King of the Koopas

Bring the fiery might of the King of the Koopas to life with this Bowser Hueforge 3D print!
This piece blends bold grayscale contrast with striking orange highlights that capture Bowser’s fierce energy and raw power.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm

Filaments Used:
    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #ffffff PLA+ Sunlu White  Transmission Distance: 8.5
    #ff8000 PLA+ Sunlu Orange  Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to White
    At layer #25 (2.08mm) swap to Orange for the rest.
 

Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays at 3.2mm as changing this will affect how the print turns out)