The Sippin' Swingers

Some more Halloween fun- AMS required. There are 3 different tree designs, one swing and  S hooks that work for all the designs- these are on one print profile. There are 2 different bases- the zombie base has an additional hole for the hand. The zombie also has his own fence design that is off to the side so it doesn't block the hand. The other base with the 2 holes will work for any of the combinations.  The fence, scarecrow, cauldron and hand can be interchangeable and will fit into the smaller hole in the base. 

There are print profiles with the combination of the characters and inserts, but there are also profiles that include all the parts on one plate. This is for printing all the parts in one go and most are about 3 hours and utilize 4 colours. For these profiles, the base is used to flush the waste from the filament changes- so the colour of the base will vary. 

The print profile has some custom painting, specific first layer colour orders and adjustments for fit. Arachne walls are important for the small lines. The character needs to be glued onto the swing then use the S hooks to hang the swing. The rest of the parts should fit snuggly in their holes and do not need glue.