Hue Forge - Gryffindor crest

Hue Forge Gryffindor crest in four colors.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 157.05x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.6mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA Bambulab PLA Black Black Transmission Distance: 0.3
    PLA Sunlu Meta red Transmission Distance: 7
    PLA+ Sunlu Pure Yellow Transmission Distance: 5
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to red
    At layer #15 (1.28mm) swap to Pure Yellow
    At layer #22 (1.84mm) swap to Ivory White for the rest.