Perfect solution for venting through a ceiling or wall if you have an H2-series printer that needs to vent gases from toxic plastics or laser cut materials. Print profiles are provided for 0.4mm and 0.6mm nozzles. Prints are support-free because the models were designed with printing in mind.
Installation
Create an opening in the wall where you intend to create the vent connection. The opening must be at least 84mm (~3 ⅓") in diameter.
Join the two threaded parts together where the shorter fitting with threads on both the inside and outside is on the inside of your room so that it can connect to the 100mm vent hose from the H2 printer (or other venting device).
The vent slides onto the smooth-walled portion of the ducted connector. Please refer to the animation for assembly.
Travis
